TRAX | Balance Weight Technology

Products | Zinc Weights for Alloys Wheels

An example of the TRAX product range of balance weights for alloy wheels is listed below.

Please contact us if you require any further information on our product range.

Product Shot

324C High retention cam-backed (Ford)

As approved by Ford for high levels of retention on alloy wheels. The cam on the back of the weight opens the clip for significantly higher levels of grip to ensure the weight does not move on heavy braking. The weight is plastic coated to OE standards.

Size range: 5/60g
Box quantities: 5/30g 100pcs/box 35/60g 50pcs/box
line Divider Product Shot

326C Universal weight for alloy wheels (plastic coated)

A universal weights for alloy wheels, this weight is designed to fit most European cars including, VW, Vauxhall-Opel, Ford, BMW, Renault, Peugeot, Fiat, Skoda, Seat, Volvo, Rover, MB. Typical European rims are 4.5/6.5mm thick. For heavier section rims which can be found on some Japanese cars (eg. Nissan, Toyota & Honda) weight series 340C should be considered. This weight is plastic coated to OE standards for protection and appearance


Size range: 5/50g
Box quantities: 5/30g 100 pcs/box 35/50g 50 pcs/box Also available in 25 pcs/box
line Divider Product Shot

326 Universal weight for alloy wheels (uncoated)

The same as series 326C but without coating.

Size range: 5/50g
Box quantities: 5/30g 100 pcs/box 35/50g 50 pcs/box
line Divider Product Shot

328C 30g-60g Renault

Designed to fit Renault alloy rims for weights 30g and over. For 25g and below use series 326C.

Size range: 30/35/40/45/50/55/60g
Box quantities: 30g 100pcs/box. 35/60 50 pcs per box
line Divider Product Shot

340C Japanese & heavy section wheels (plastic coated)

This weight has a higher sitting clip and will fit thicker section wheels which may be found on some Japanese cars including Nissan, Toyota & Honda.

The weight will typically fit rims with a height of 6.6/7.5mm.
Size range: 10/50g
Box quantities: 25 pcs/box

line Divider

Specifications are liable to change without notice. The pictures used are to be used as a guide only and are not guaranteed to represent product shape or appearance. Where necessary, please enquire for samples before use.

Alloy Wheel Fitment Guide

Alloy wheel rim shapes will vary significantly in shape, height and depth. Each car manufacturer can have a different alloy rim shapes depending on the rim manufacturer. Wide tolerances are allowed within ETRTO specifications.

For guidance only.

spacer
Outside these ranges adhesive weights are recommended.
spacer