Products | Zinc Weights for Alloys Wheels
An example of the Trax® product range of balance weights for alloy wheels is listed below.
Please contact us if you require any further information on our product range.
326C Universal weight for alloy wheels (plastic coated)
Designed to fit most European cars with rim
horns 4.5/6.5mm thick. Approved by Volvo and
Renault. For thicker rims (as found on some
Japanese cars) the series 340C is recommended.
Plastic coated to OE standards.
Size range: 5/60g
Box quantities: 5/30g 100 pcs/box 35/60g 50 pcs/box
Also available in 25 pcs/box
326 Universal weight for alloy wheels (uncoated)
The same as series 326C but without coating.
Size range: 5/60gBox quantities: 5/30g 100 pcs/box 35/60g 50 pcs/box
340C Japanese and thick section alloy
wheels (plastic coated)
Designed to fit thicker section alloy rim horns 6.5/7.5mm, as found on many Japanese cars, Nissan, Honda and Toyota.
Plastic coated to OE standards.
Size range: 5/50g
Box quantities: 25 weights per box
324C High retention CAM-BACK™ weight for alloy wheels (plastic coated)
Developed with Ford for high levels of retention on alloy wheels. The CAM-BACK™ design opens the clip for improved retention.
Plastic coated to OE standards.
Box quantities: 25 weights per box
328C Renault 30-60g (plastic coated)
Developed with Renault to fit alloy rims 30g and over with improved fit and retention. For 25g and below use 326C.
Size range: 30/35/40/45/50/55/60gBox quantities: 25 weights per box
Specifications are liable to change without notice. The pictures used are to be used as a guide only and are not guaranteed to represent product shape or appearance. Where necessary, please enquire for samples
before use.
Alloy Wheel Fitment Guide
Alloy wheel rim horns will vary significantly in shape, height and depth. Each car manufacturer can have a different alloy rim shape depending on the rim manufacturer. Wide tolerances are allowed within ETRTO specifications.
For guidance only.
