200 Universal CAM-BACKED weight

The unique cam-backed design helps to optimise the weight retention over a wide variety of steel wheel shapes and sizes.

Universal fitment – fits most steel wheels

2 cam design for good weight retention

Slimline shape for wheel trim clearance

Size range: 5/50g
Box quantities: 5/30g 100pcs/box 35/50g 50pcs/box

200C Universal with corrosion protection

As series 200 but with added corrosion protection to OE standards. Original Equipment to Volvo.

Size range: 5/50g
Box quantities: 5/30g 100pcs/box 35/50g 50pcs/box

222C Thin section steel wheels,
eg Ford

Approved by Ford for high levels of retention on modern thing section wheel rims. Series 222C weight is designed to fit steel wheels typically down to 1.5mm thick (1.3mm in local areas).

Only available with corrosion protection (OE specification)

Size range: 5/60g
Box quantities: 5/30g 100pcs/box 35/60g 50pcs/box

CAM-BACKED WEIGHTS - THE BENEFITS

1. SAFETY – The top cam increases the force required to remove the weight which ensures it will not fall away from the rim. 2. RETENTION – The bottom cam forces the weight body away from the rim thereby opening the spring clip and significantly increasing retention. This increased retention ensures no movement of the weight on thin section rims which can cause imbalance. 3. SLIMLINE – The slimline shape allows good wheel trim clearance

Cam-backed weights are designed to give high levels of grip to ensure no movement on heavy braking which can cause imbalance.